RefreshSelected$32,271Seattle average · national $28,458
New cabinet fronts on the old boxes, a new range and refrigerator, laminate counters, a new sink, flooring and paint.
- For your kitchen
- $27,400
- Recouped at resale
- 118%
- Average per sq ft
- $161
Seattle kitchen remodel costs
The same remodel costs about 15% more in Seattle than the national average. Enter your kitchen’s size and the scope of work for a Seattle cost range and a budget split, from the Seattle figures in the 2025 Cost vs. Value Report.
Estimated cost
$81,200
Most quotes land from $69,000 to $93,400, about $541 a square foot.
Washington sales tax applies to the whole contract, labor included: budget about $8,600 more if a quote leaves it out.
Budget split
The split follows the National Kitchen and Bath Association's budget guide. Cabinets take the largest share, then the labor to install everything.
Share of the total, for your full remodel
Estimated total$81,200
New plumbing, gas and wiring runs add to any quote. Keeping them where they are avoids that.
Taking out or moving a wall brings in structural work and permits.
Cabinets are the largest line, and stock, semi-custom and custom boxes are priced far apart.
From about $15 a square foot for laminate to $250 for marble. Price your counters
Seattle prices
Seattle figures from the 2025 Cost vs. Value Report, each for a 200 square foot kitchen, beside the national average and what the same scope would cost for yours.
RefreshSelected$32,271Seattle average · national $28,458
New cabinet fronts on the old boxes, a new range and refrigerator, laminate counters, a new sink, flooring and paint.
Full remodelSelected$95,542Seattle average · national $82,793
A new layout with 30 feet of semi-custom cabinets, a 3 by 5 foot island, new counters, sink and appliances.
High-endSelected$188,401Seattle average · national $164,104
The same kitchen with custom cabinets, stone counters and top-of-the-line, built-in appliances.
Permits & tax
Four things that change a Seattle kitchen budget or the contractor you choose.
Most projects in Seattle need a permit from SDCI, the city’s building department, and work that moves plumbing, adds electrical circuits or takes out a wall needs one. Replacing cabinets and finishes in place often doesn’t. Look up your project on SDCI’s Do you need a permit? page before work starts.
Washington contractors register with the Department of Labor & Industries and carry a bond and liability insurance. L&I’s Verify a contractor tool shows all three, plus workers’ comp if they have employees. Check again close to signing, since L&I suspends registrations that lapse.
In Washington a remodeler collects sales tax on the full contract price, labor, permits and materials alike, not only on materials. At Seattle’s combined rate of about 10.5% in 2026, that is roughly $10,000 on a $95,000 remodel. Ask whether each quote includes it, and confirm the current rate with the Department of Revenue.
Homes built before 1978 may have lead paint. A remodeler disturbing painted surfaces in one must be certified for lead-safe work under the EPA’s renovation rule, which Washington runs through its Department of Commerce. Ask for the certification if your house is that old.
FAQ
Where the Seattle numbers come from, and what they leave out.
About 15%. The 2025 Cost vs. Value Report prices the same model kitchen at $95,542 in Seattle for a full midrange remodel, against $82,793 nationally. A refresh is $32,271 against $28,458.
Better than average. In 2025 a Seattle refresh recouped 118.1% of its cost at resale (113% nationally), a full midrange remodel 53.1% and a high-end one 38.7%.
Treat it as extra. Washington taxes the whole remodel contract, labor included, so the calculator shows it on its own line at about 10.5%. Ask each remodeler whether their quote includes it.
Usually, if you move plumbing, add electrical circuits or take out a wall. Swapping cabinets and finishes in place often doesn’t need one. SDCI’s “Do you need a permit?” page is the place to check.
Look them up on L&I’s Verify tool for their registration, bond and insurance, and ask for references from kitchens they finished recently.
The Seattle figures are for a 200 square foot kitchen. We assume about 40% of the cost, such as appliances, stays the same at any size, and scale the rest to your square feet.
Free to request
Send your estimate and project to remodelers who work in your ZIP code. They contact you; you decide.
Your range, scope and kitchen size are filled in from the calculator, and you can add a budget of your own.
Remodelers who work in your area contact you by call, text or email.
Check each one's license and insurance before you sign anything.